GRIFFON SFT 101 Repair Tape is black self-fusing tape, most commonly used for pipe system repairs. SFT-101 Repair gives a quick and effective sealing solution for a wide range of pipe and fitting maintenance requirements....

ABS Plain Inch/Metric Adaptor Sockets are WRAS approved, made from the material acrylonitrile butadiene styrene.  Inch to Metric Adaptor Sockets will convert the end of a length of ABS pipe from Imperial to Metric.

Plain/Threaded Unions are a pipe fitting used to connect a piece of pipe to a threaded fitting, with a mechanism which allows the pipe to be separated if necessary.  Our ABS pressure pipe range is...

Threaded Unions are used to connect two threaded pipe fittings of the same diameter, with a mechanism which allows them to be separated if necessary.  Our ABS pressure pipe range is made from the material...

Threaded Reducing Sockets have two female BSP threaded ends that connect to two male threaded ABS fittings, where one of these is smaller on one side of the socket than the other connecting side. Our...

Plain/Threaded 45 Degree Elbows are a pipe fitting used to connect a piece of pipe to a threaded fitting to form an angle of 45 degrees.  Our ABS pressure pipe range is made from the...

Our ABS pressure pipe range is made from the material acrylonitrile butadiene styrene and subject to the system pressure, has a working temperature of -40°C to +70°C. WRAS Approved

Our ABS pressure pipe range is composed of acrylonitrile butadiene styrene, subject to the pressure system; with a working temperature ranging between -40°C to +70°C. Threaded equal tees are a pipe fitting used to connect...

Threaded Sockets are a pipe fitting used to connect two threaded fittings of the same diameter. Our ABS pressure pipe range is made from the material acrylonitrile butadiene styrene and subject to the system pressure,...

Threaded 90 Degree Elbows are a pipe fitting used to connect two threaded fittings of the same diameter, to form an angle of 90 degrees.  Our ABS pressure pipe range is made from the material...

ABS Blank Flange - PN16 are made from the material acrylonitrile butadiene styrene.  Blank Flanges are used to create a seal at the end of a length of pipe of the same diameter, with the...

 ABS Hose Adaptor - Male Spigot x mm Hose Tails are WRAS approved, made from the material acrylonitrile butadiene styrene.  Hose Adaptor Male Spigots are used to connect a flexible hose to an ABS fitting, with the...

ABS Hose Adaptor - Male BSP x mm Hose Tail are WRAS approved, made from the material acrylonitrile butadiene styrene. Our standard ABS Hose Adaptor Male BSP x mm Hose Tail have a male BSP...

Reducing Nipples have two male threaded ends and are used to connect threaded ABS fittings or valves with one diameter smaller than the other. Our ABS pressure pipe range is made from the material acrylonitrile...

Reinforced Plain/Threaded Sockets are a pipe fitting used to connect either a plain fitting or piece of pipe to a threaded fitting, or piece of pipe of the same diameter; with a stainless steel reinforced...

Reinforced 90 Degree Elbows are a pipe fitting used to connect a piece of pipe to a threaded fitting to form an angle of 90 degrees, with a stainless steel reinforced ring on the threaded...

Reinforced Plain/Threaded Equal Tees are a pipe fitting used to connect two pieces of pipe to a threaded fitting to form a T shape, with a stainless steel reinforced ring on the threaded side for...

Galvanised mild steel backing rings are used with flanges for connecting two pieces of pipe together alongside stub or full face flanges. 1/2" TO 3" - 4 Holes 4" TO 8" - 8 Holes

Galvanised mild steel backing rings are used with flanges for connecting two pieces of pipe together alongside stub or full face flanges. 1/2" TO 2" - 4 Holes 4" TO 6" - 8 Holes 8"...

ABS Threaded Reducing Piece is used to connect a threaded fitting to a smaller threaded fitting of either the same or different genders. SMALLER SIDE MALE - LARGER SIDE FEMALE WRAS approved 15 Bar at...

ABS Reinforced Adaptors are used to add a female thread connection to an ABS fitting or valve with a stainless-steel backing ring on the threaded side for extra durability. 15 Bar at 20°c WRAS approved...